Forklift Licence Training




Forklift Licence course

Licence to operate a Forklift Truck – TLILIC0003

Course Information

Duration: 2 day course

Times: 7:30am – 4:00pm approx.

Cost: $495.00 (No GST applicable) Weekends $550.00

Location: 3B Lara Way Campbellfield 

Also Williamstown North, Clayton & Hallam

A forklift is a powered industrial truck equipped with a mast and an elevating load carriage with a pair of fork arms attached to lift loads.

This course covers the skills required to safely & productively operate a forklift truck, at your workplace, and if successful (competent), allows students to apply to WorkSafe Victoria for their High Risk Work (HRW) Licence for LF – Forklift Truck Operation.

















IMG_9470
IMG_1745v2
 

Course Overview


Day 1:

Students are trained / prepared for their written / knowledge, calculations & practical / driving assessments.

Day 2:

Students attempt to successfully complete their Calculations, Knowledge & Practical assessments.
 

Course Outline

  • Identifying hazards & implementing hazard controls
  • Conduct a pre - start & start up check on the machine
  • Calculating load weight & forklift capacity 
  • Driving the forklift
  • Operating a loaded forklift 
  • Load placement on the ground and into different levels of pallet racking.
  • Park & Shut down the forklift safely



Certification

 

Students who are deemed competent, will receive a Notice of Assessment (Temporary licence) from their trainer, that will allow them to legally operate a forklift truck immediately. Students are then required to apply to WorkSafe Victoria, either online or at the Post Office, for their full licence card / digital licence, within 60 days of successfully completing the course. High Risk Work Licence fees are currently $71.55 for 5 years.

Photo_8

Student requirements

  • At least 18 years old
  • Have good language & literacy skills, reading & writing
  • Current Photo ID – Australian Drivers Licence, Passport (Australian or International), Proof of Age card or Keypass
  • Willingness to study their highlighted study material, the night before their assessments.

 

Onsite Forklift Refresher Course

These are normally a half day course, conducted at your workplace, to provide your licenced employees, with additional forklift training, to promote forklift safety, reinforce basic forklift fundamentals and update them on any changes within OH&S law.


Duration: 4 hours
Cost: $120.00 – $150.00 (Group of 5 to 8)

Forklift / Order Picker refresher course – Schedule:

4 hours (Approx.) Group of 5-8 employees

DURATION

DESCRIPTION

LOCATION

COMMENTS

5 Minutes

Introduction

Training Room

Course Objectives

1 Hour

Power Point Presentation / Videos

Training Room

Interactive

15 Minutes

Revision for Written Test

Training Room

Quizzing / Re-Iterating

20 Minutes

Written Test

Training Room

27 Questions

20 Minutes

Written Test Correction

Training Room

Extra Info. / Feedback

5 Minutes

Set Up Chicane / Floor Area

Warehouse / Racking

Cones, Skids

10 Minutes

Pre-Operational Checks

Warehouse / Racking

Nominated Forklift

15 Minutes

Practical Assessment

Warehouse / Racking

Employee # 1

15 Minutes

Practical Assessment

Warehouse / Racking

Employee # 2

15 Minutes

Practical Assessment

Warehouse / Racking

Employee #3

15 Minutes

Practical Assessment

Warehouse / Racking

Employee #4

15 Minutes

Practical Assessment

Warehouse / Racking

Employee #5

15 Minutes

Practical Assessment

Warehouse / Racking

Employee #6

Forklift / Order Picker refresher course – Schedule:

4 hours (Approx.) Group of 5-7 employees

DURATION

DESCRIPTION

LOCATION

COMMENTS

5 Minutes

Introduction

Training Room

Course Objectives

1 Hour

Power Point Presentation / Videos

Training Room

Interactive

15 Minutes

Revision for Written Test

Training Room

Quizzing / Re-Iterating

20 Minutes

Written Test

Training Room

27 Questions

20 Minutes

Written Test Correction

Training Room

Extra Info. / Feedback

5 Minutes

Set Up Chicane / Floor Area

Warehouse / Racking

Cones, Skids

10 Minutes

Pre-Operational Checks

Warehouse / Racking

Nominated Forklift

15 Minutes

Practical Assessment

Warehouse / Racking

Employee # 1

15 Minutes

Practical Assessment

Warehouse / Racking

Employee # 2

15 Minutes

Practical Assessment

Warehouse / Racking

Employee #3

15 Minutes

Practical Assessment

Warehouse / Racking

Employee #4

15 Minutes

Practical Assessment

Warehouse / Racking

Employee #5

15 Minutes

Practical Assessment

Warehouse / Racking

Employee #6

Onsite Course 

Location – Onsite Workplace

Course Size – Group of 5 – 8 employees

Duration – 4 hours 

(2 hours for Knowledge & 2 hours for Practical)

Cost – $120 – $150 per person (GST N/A)

Please Note: Practical only courses available 

 

One-On-One Practical Refresher

Location – Campbellfield

Duration – 2-3 hours

Cost from $200 per person (GST N/A)

VOC – Verification Of Competency

These are short practical assessments on prospective employees a business is considering employing, or an assessment on existing employee, that has been involved in a workplace incident or accident.
These are designed to pin point desirable candidates from a pool of job applicants. Alternatively, they can be used to see if the employee has the required current skill base to continue the safe operation of a forklift at work.

Duration: 30 minutes.
Cost: $100 per person.

IMG_1742v2
 

Order Picker Licence course

Licence to operate an Order Picking Forklift Truck - TLILIC004

Duration:

2 day course.

Times:

7:00am - 3:30pm approx.

Cost:

$495.00 (No GST applicable).

Location:

Unit 1 - 1 Akuna Drive Williamstown North.

Course Overview

Day 1:

Students are trained / prepared for their written / knowledge, calculations & practical / driving assessments.

Day 2:

Students attempt to successfully complete their Calculations, Knowledge & Practical assessments.

Course Outline

  • Identifying hazards & implementing hazard controls
  • Conduct a pre – start & start up check on the machine
  • Calculating load weight & Order Picker capacity
  • Driving the order picker
  • Operating a loaded order picker 
  • Load placement on the ground and into different levels of pallet racking.
  • Park & Shut down the order picker safely

Certification

 Students who are deemed competent, will receive a Notice of Assessment (Temporary licence) from their trainer, that will allow them to legally operate an order picker immediately. Students are then required to apply to WorkSafe Victoria, either online or at the Post Office, for their full licence card / digital licence, within 60 days of successfully completing the course. High Risk Work Licence fees are currently $71.55 for 5 years.

An Order Picker is a machine where the operator’s controls are within the work platform & the operator is raised & lowered with it.
A powered lifting device used to pick and deliver cartons needed for filling orders from storage.
Similar to a forklift, an order picker allows the operator to stand in a platform and get elevated up to a specific height / racking shelf, with the pallet, and pick a customer’s order of stock.
Hence the name “order picker”.

It allows the operator to grab exactly what they need, for a specific order (for eg. 3 boxes of pens), as opposed to the entire pallet of pens, which is maybe not be required.
A safety harness is required to be worn at all times while operating the order picker.